top of page

NatureWax C3 Soy Wax Flakes 2lbs

C$ 24.99

Amazon Prime members are eligible for free shipping

NatureWax C-3 soy wax is an all-natural soy wax blend that is well known for excellent jar adhesion (minimal wet spots), minimal frosting, and excellent scent throw. We have found that NatureWax C-3 produces the best aesthetic candles among the various soy waxes we have tested/carry and is very easy to work with.


Melt Point: 125 - 130°F

Suggested Pouring Temperature: 120-165°F


Advantages of using C-3 soy wax:

- Typically requires only a single pour (tops can be smoothed out with a heat gun if necessary)

- Formulated to minimize frosting when used correctly

- Strong hot and cold scent throw

- Typical fragrance load is 6% or less (fragrance loads up to 7-10% are possible with the addition of additives)

- Smooth and creamy appearance

- Excellent jar adhesion

- Comes in flake form

- No additives required


Basic Guidelines:

- Melt point: 125 – 130°F

- Heat wax to temperature 130 - 190° (caution: heating wax above 200° may cause wax discoloration)

- Add dye as needed and mix thoroughly

- Add candle fragrance oil as needed and mix thoroughly (fragrance oil should be added just before pouring to prevent fragrance oil from evaporating)

- Pouring temperatures should typically be around 120° to 165°, though experimentation is recommended to determine optimal pouring temperature

- When pouring melted wax into containers, the containers should be at room temperature or slightly warmer

- Allow candles to cool as slow as possible to achieve good jar adhesion and create a smooth finish

bottom of page